Mostly Walnut in Stamford

I took the mill to Stamford this past weekend to mill some logs for Peter.  He owns a construction company and a millwork shop.  Due to the construction company, he had equipment to move logs, which was a good thing, because some of them were rather large.  The millwork company gave him a place to use some of the lumber I cut for him.

We started out milling a few tamarack logs, which was a first for me.  Tamarack is a pine tree that looses its needles in the fall.  It saws and looks a lot like pine.

Then we moved on to some of the larger logs.  The log in the first picture measured 36 inches in diameter by 15 feet long.  36 inches is the largest diameter log that my mill is supposed to be able to handle, but that assumes the log is a perfect cylinder.  In the real world, of course, logs are never perfect cylinders, so some trimming by chainsaw was necessary in getting started with this log.  The good news is that we were able to mill this log and made a lot of very nice lumber, including a sizable stack of 24" wide boards.  The bad news was that the log was pine, not walnut as Peter had thought.

The next log was a bit smaller at 31 inches by 8 feet.  But this one was the dark walnut that Peter wanted.  We got some nice wide boards out of this log too.

After logs like those, everything else seemed like an anticlimax.  But, we continued to mill smaller, lower quality logs until all that was left in the log pile was sticks and twigs.

Yet More Oak in Higganum

This past weekend I finally wrapped up the job in Higganum.  Six days total, over 70 logs totaling over 6000 bdft by log scale.

The weather was more cooperative, without even the threat of rain.  We were being bother by bees for much of the time, but no one got stung.

We were short handed this weekend, with only three of us on Saturday and Sunday morning, with a welcome forth hand joining us on Sunday afternoon.  Beams were initially just dumped on the ground to get them off the mill, but were stacked more neatly later.  Smaller lumber went directly into Scott's trailer.

Scott says he may have another job for me in September, somewhere east of the river.

More Oak in Higganum

I worked for Scott in Higganum again this weekend.  Sorry, no pictures.  We got rained out in mid-afternoon on both Saturday and Sunday, but we still managed to mill over 2,000 board feet of logs.

Scott had plenty of helpers on hand to move logs and beams, which was greatly appreciated since I'd had hernia surgery on Monday.  

We've milled about 45 logs so far, but there's still more left.  I'll be going back in two weeks, and hope to be able to finish up at that time.

I'm getting much better at being able to tell white oak from red.

Oak In Higganum

This job was by far my biggest yet, and it's not over by a long shot.  The customer was Scott.  The logs though were on the property of Scott's friend Troy, where the trees were taken down to open up the woods that had closed in since the house was built.

Scott has plans to build a small post & beam building, and was primarily interested in beams and 2 inch thick lumber to be used as flooring.  Some one inch thick lumber was inevitably produced during the milling process as well.

I had visited Scott at the site a month ago before any trees had been turned into logs. We talked about his project, and trees and logs and the site requirements for the sawmill.  I expected to find a fair number of logs lined up when I arrived in Higganum, CT on Saturday morning, but was surprised to find five big piles of big oak logs.  There was no question that this job was going to take more than one weekend.

The milling site was tight, but well organized.  Beams and scrap went to the rear of the mill and into trailers.  Boards were brought forward with the Wood-Mizer board return, on put onto my sawhorses temporarily, and then onto another trailer.  

I measured the logs as they were loaded onto the mill, except for one or two where I forgot.  In two days working 8 to 5, we milled 25 logs which scaled at 2,165 board feet. 

This is the first log pile we tackled.  That's Scott in the center trying to work a log free.  His dad is supervising on the left.  The small Kubota in the background was not used to create these log piles.

We've moved on the second pile on Saturday afternoon.  Here, one of Scott helpers in the red shirt is demonstrating how not to pull a log down off a log pile.

That's better.

The log is safely on the mill's loading arms.

Scott on one of his fine oak logs.

Maple in Andover

I took the sawmill to Andover, Connecticut today, a trip of only 7 miles.  A new winner in the closest customer contest.  George’s story is starting to sound familiar. The lot was cleared for the new house about 20 years ago. At the time there was plenty of sunlight, but trees keep growing, and they tend to lean into the clearing, and therefore toward the house, so arborists are called in to open things up again. 

George and his teenaged son Corey had apparently caught the wood turning bug, and wanted the logs cut in a way that would supply them with raw material for their new hobby.  George wanted beams with the irregularities removed, but some amount of bark left was acceptable. This was an unusual cutting pattern, but made for some fast milling. It also left us with some pretty heavy beams to carry off the mill.

Most of the reasonably sized logs were behind the house, and needed to be brought around to the front. The LogRite Fetching Arch fit the bill perfectly. George and Corey used it with the two man handle to move some of the smaller logs, and with the tow tongue and winch together with their Jeep SUV to move the larger logs. While they moved logs, I ran the mill.

More Oak in Glastonbury

I had a job in Stamford scheduled for this weekend, but the customer canceled and asked to be rescheduled in October. As a result, I was able to return to Bob's orchard in Glastonbury to finish the job started last weekend. And this time I remembered my camera.

Either I was mistaken when I thought we were near the end of the log pile last weekend, or Bob found some more logs somewhere. We milled for almost 5 hours, producing over 700 board feet of mostly 1" lumber. Most of it was oak, but there was some birch, and some other species we couldn't identify. Productivity could have been better, but many of the logs were on the short side, under 8 feet, which slows things down.

Oak in Glastonbury

Today’s job was in Glastonbury. It’s nice to get some jobs closer to home. Bob apparently has many interests. He’s got a property in a residential neighborhood with a fair sized orchard on it, and a big red barn. It’s all very picturesque, but I forgot my camera.

He had some oak logs that he wanted milled into 1” and 2” boards.

After 2 1/2 hours, we were getting close to the end of the log pile when I lost the ability to move the head forward or backward. It didn't take long to trace the cause to the electric motor that drives the head movement. It had seized up, so we were done for the day.

A call to Wood-Mizer on Monday sent a replacement motor heading my way that same day with no questions asked. It arrived on Thursday, which gave me plenty of time to install it before the next weekend's milling.